• Admixtures
EUCON 230

EUCON 230 is a water reducing and retarding admixture for concrete. This versatile admixture consists of a modified carboxylate polymer which produces high quality concrete economically. Eucon 230 shows improved finishing characteristics and provides homogeneous concrete.

EUCON 37

EUCON 37 is a high range water-reducing admixture. It may be added to the concrete at the job site or at the ready mix concrete plant. Consequently, it is recommended for prestressed concrete. It is also compatible with airentraining agents, waterproofing agents, calcium chloride and many other admixtures; however, each material should be added to the concrete separately.

EUCON 37G

EUCON 37G is a high range water-reducing/retarding superplasticizing admixture. It may be added to the concrete at the job site or at the ready mix concrete plant. EUCON 37G is formulated to retain plastic consistancy for 60-90 minutes after dosing depending on the initial slumps, dosage rates, and ambient temperature. No chlorides are used in its formulation; consequently, it is recommended for prestressed concrete. It is also compatible with air-entraining agents, waterproofing agents, calcium chloride and many other admixtures; however, each material should be added to the concrete separately.

EUCON 37L

EUCON 37L is a high range water-reducing/retarding superplasticizing admixture. It may be added to the concrete at the job site or at the ready mix concrete plant. EUCON 37L is formulated to retain plastic consistancy for 60-90 minutes after dosing depending on the initial slumps, dosage rates, and ambient temperature. No chlorides are used in its formulation; consequently, it is recommended for prestressed concrete. It is also compatible with airentraining agents, waterproofing agents, calcium chloride and many other admixtures; however, each material should be added to the concrete separately.

EUCON 537

EUCON 537 is a high range water reducing admixture formulated specifically to extend the working time of flowing concrete at high temperatures. EUCON 537 does not contain calcium chloride or any other ingredients that would promote the corrosion of steel.

EUCON 550

EUCON 550 is a high range water reducing admixture formulated specifically to extend the working time of flowing concrete at high temperatures. EUCON 550 does not contain calcium chloride or any other ingredients that would promote the corrosion of steel.

EUCON AEA-92

EUCON AEA-92 is formulated for use as an air entraining admixture for concrete of all types and is manufactured under rigid control which assures uniform and precise performance. It should be added to the mix independently and not with other admixtures.

EUCON DC - IN

EUCON DC - IN is a ready to use polycarboxylate - based admixture used to more efficiently produce machine-made concrete products. EUCON DC – IN increases production rate, improves cement efficiency, and accelerates early strength development. Units produced with EUCON DC – IN are more dimensionally stable, have improved edge and corner definition, and are more resistant to damage in transport. EUCON DC – IN contains no added chlorides and will not promote corrosion of steel.

EUCON HC

EUCON HC is a water reducing and retarding admixture for concrete. This versatile admixture consists of a modified carboxylate polymer which produces high quality concrete economically. Eucon HC shows improved finishing characteristics and provides homogeneous concrete.

EUCON HC R4

EUCON HC R4 is a water reducing and retarding admixture for concrete. This versatile admixture consists of a modified carboxylate polymer which produces high quality concrete economically. Eucon HC R4 shows improved finishing characteristics and provides homogeneous concrete.

INTEGRAL WATERPELLER - IN

INTEGRAL WATERPELLER is an Integral waterproofing admixture used to reduce the permeability of concrete and mortar. INTEGRAL WATERPELLER also increases the plasticity and cohesion and improves concrete quality. INTEGRAL WATERPELLER aids in lowering the water to produce dense concrete.

PLASTOL 341

PLASTOL 341 is a polycarboxylate plasticising admixture manufactured with state of the art chemistries which provides exceptional slump retention without excessive retardation in very warm temperature. Plastol 341 shows improved finishing characteristics when compared to other commonly used admixtures. Plastol 341 doesn't contain Calcium Chloride.

PLASTOL 3610

PLASTOL 3610 is a polycarboxylate plasticising admixture manufactured with state of the art chemistries developed for the production of high performance concrete / high strength concrete. Plastol 3610 shows improved finishing characteristics when compared to other commonly used admixtures. Plastol 3610 doesn't contain Calcium Chloride.

PLASTOL SPC

PLASTOL SPC is a polycarboxylate based high range water-reducing admixture which enables concrete to be produced with very low water to cement ratios. PLASTOL SPC produces flowable and self-consolidating concrete at low doses and can obtain up to 45% water reduction. PLASTOL SPC does not contain added chlorides and will not promote corrosion in steel. PLASTOL SPC is compatible with air-entraining agents, microsilica, accelerators and many other admixtures; however, each material should be added to the concrete separately.

PLASTOL ULTRA 209

PLASTOL ULTRA 209 high-range water-reducing and superplasticizing admixture is formulated using advanced polycarboxylate technology, specifically engineered for concrete to provide maximum water reduction, slump, flo , and improved finishing characteristcis while maintaining consistent air contents from initial batching to fina placement. In addition, PLASTOL ULTRA 209 provides high compressive strengths, flexural strength, and excellent setting characteristics. PLASTOL ULTRA 209 can be used to reduce the total cement content and used in combination with supplementary cementitious materials. PLASTOL ULTRA 209 does not contain added chlorides or chemicals known to promote the corrosion of steel.

Contact Us

The information you have provided us will help us deliver information to you regarding our products and services. By checking this box you indicate that you have read and agree to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Technical Downloads
Title Type Download
EUCON 230 Technical Data
EUCON 37 Technical Data
EUCON 37G Technical Data
EUCON 37L Technical Data
EUCON 537 Technical Data
EUCON 550 Technical Data
EUCON AEA-92 Technical Data
EUCON DC - IN Technical Data
EUCON HC Technical Data
EUCON HC R4 Technical Data
INTEGRAL WATERPELLER - IN Technical Data
PLASTOL 341 Technical Data
PLASTOL 3610 Technical Data
PLASTOL SPC Technical Data
PLASTOL ULTRA 209 Technical Data

This website uses cookies and other tracking technologies (also known as pixels or beacons) to aid your experience (such as viewing videos), as well as “performance cookies” to analyse your use of this website and to assist with marketing efforts. If you click the "Accept All Cookies" button or continue navigating the website, you agree to having those first and third-party cookies set on your device. If you do not wish to accept cookies from this website, you can choose to not allow cookies from this website by updating your browser preferences. For more information on how we use Cookies, please read our privacy policy.

Accept All Cookies

Stay Connected